Products

CASE Ingredients Solvent A is a biobased replacement for d-limonene made from green, carbon neutral, sustainable chemistry that is biodegradable. It is an EPA approved SNAP solvent that contains no HAPS, and no environmentally hazardous chemicals. It is a completely safe, non-toxic and non carcinogenic alternative to high priced d-limonene.

CASE Ingredients Solvent B is a patented formula of vegetable esters made from soybeans and corn, and is ideal for formulating mastic/adhesives removers, asphalt cleaners, release agents, and hand cleaners.

DiTech Foam Stabilizer is a potassium soap used as a cleaning agent and foam controller in detergent formulas. Due to its anionic character, ICTEOL® K-50 E is compatible with other anionic, non-ionic, amphoteric surfactants, but it is not compatible with cationics.

Ditech Multifunctional B is used for a broad range of applications but mainly used as raw materials or auxiliaries in fiber production, for agricultural products, in photography and in the chemical industry. The Ditech Multifunctional B has been especially developed to serve to the particular requirements of the construction and Admixture Industry.

MultiTech Binder & Resin is UV-curable undercoat for metal vapor deposition. It has good adhesion not only to vapor deposition layer of aluminum, tin and indium but also to plastic substrates, such as ABS, PC(Polycarbonate) and PMMA. Automotive exterior/interior parts such as millimeter-wave radar emblems are suitable applications of UM-1273T.

MultiTech Difunctional B is a product that is specially developed for the formation of active chlorine dioxide generated by mixing powdered inputs that are indicated for higher flows and systems of medium or high complexity. It is used in applications that demand safety, metering accuracy, and reliability. This product is a blend of water-soluble salts, making it 100% soluble, and easy to handle and apply. It also has a low operating cost.

MultiTech Lubricant is a nonionic macro emulsion of a nonreactive polydimethylsiloxane.

MultiTech MultiFunctional I is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts MultiTech MultiFunctional I and 1 partMultiTech MultiFunctional I to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

Polymer Mold Release Agent is a versatile coating designed to release all injection molded thermoplastic resins. It produces a very low coefficient of static friction so parts release easily. It resists film buildup, eliminates knit lines, and yields multiple releases with a single application. TPC-1 is food grade and meets FDA regulation 21 CFR181.28 as a release agent.

RTU Adhesive A is a warm processable, high viscosity, high modulus, low conductive glass bonding adhesive can be used primerless on paint and glass._x005F _x005F It should be combined with a clear activator developed for Uniwipe Adhesives on ceramic coated glass. It is a one component, moisture curing, solvent free adhesive with excellent sag and bead stability based on polyurethane chemistry. The BRTU Adhesive A adhesive cures with environmental moisture and skin formation and curing is dependent on humidity, temperature and application dimensions._x005F _x005F All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.

RTU Adhesive B is a two-component, addition-curing silicone composition curing to a soft silicone adhesive.

RTU Cleaner A is a waterborne high performance blend of anionic and nonionic surface active agents that will remove oil, grease and dirt residue from any washable surface. It is biodegradable, non-hazardous and VOC compliant. TERAZYME GP„¢ is formulated for quick, thorough lifting and suspension of contaminants for easy rinsing. TERAZYME GP„¢ has undergone years of field trials and testing to meet government regulations for safe, non-toxic chemicals and is authorized by the USDA for use in federally inspected meat and poultry plants.

RTU Cleaner B is dilutable, no-rinse sanitizer for food and non-food contact surfaces.

RTU Enamel is an extremely hard and durable two-component epoxy for consumer and professional use. It is specially designed to restore the finish on tubs, sinks, toilets, ceramic wall tiles, and appliances. Klenk's Epoxy Enamel can be used on any hard, solvent-resistant surface, such as ceramic, metal, stone, marble, melamine, fiberglass, etc. Do not use on plastic or imitation marble, stove top ranges, or other surfaces subject to excessive heat. Always test surface with RTU Enamel Thinner prior to use. RTU Enamel is available in three standard colors (White, Bone, Almond) as well as special order colors.

RTU Encapsulant is a pourable, addition-curing, 2-part silicone rubber of low viscosity that cures extremely fastafter activation by UV light exposure to a soft silicone elastomer.

RTU Foam is a polyethylene foam material that is expanded in heat oven after extruded with the help of chemical inflators and cross linking agents that are put inside. It has advanced chemical and mechanical features thanks to its cross-linked structure Compared to DurProx (physically Cross-Linked Polyethylene Foam) the cell structure is larger and the surface is not as smooth. It can be used in many areas that sound, heat, humidity insulation and shock protection is intended. It can be produced for different sectors as cut plate, roll, tube, extra-laminated or non-laminated.

RTU Foam A is a co-extruded combination of PETG Copolyester resin with a proprietary foamed core made from Eastmans RTU Foam A System. RTU Foam A offers advantages over traditional materials where low weight and sustainability are larger parts of an applications fitness for use requirements. PETG FOAM is a reliable, safe alternative to high impact polystyrene (HIPS) in the opaque rigid medical packaging market. PETG FOAM also shows considerable manufacturing improvements over HIPS in terms of processing, waste reduction, and reduced cleaning; all resulting in lower overall processing costs.