Results

Composite Materials Surface Finish A Base White have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, Composite Materials Surface Finish A coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Composite Materials Surface Finish A gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.

Composite Materials Surface Finish B is a pre-accelerated topcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product has been formulated for brush application.

Composite Materials Surface Finish C is a Two component epoxy system, Component A epoxy resin, filled, black, Component B amine, unfilled, amber.

Composite Materials Surface Finish D is a pre-accelerated, low-smoke, fire-retardant, polyester-based gelcoat designed to be applied by spray in a thin layer of 500μm. It incorporates new intumescent technology. When exposed to fire, Composite Materials Surface Finish D forms a foamed, cellular charred layer, offering a high degree of protection to the surface of the composite. It is restricted to a standard light grey color and is designed to be post-painted. It is formulated to EN45545-2 standard to meet HL2.