Composite Materials Core Material B

Identification

Composite Core

Polyurethane Foam

Blend

false

Single Ingredient

true

Categories

Markets → Automotive & Transportation → Applications → Automotive → Automotive Lighting

Markets → Automotive & Transportation → Applications → Automotive → Exterior & Body

Technologies → Composite Materials → Product Families → Core Materials → Foam Cores

Markets → Automotive & Transportation → Applications → Automotive → Interior

Markets → Building & Construction → Applications → Building Materials → Interior Fixtures

Markets → Industrial → Applications → Chemical & Industrial Manufacturing → Tooling & Moldmaking

Markets → Building & Construction → Applications → Building Materials → Wall Panels

End Uses

Plastics & Elastomers End Uses

Lighting Fixtures

Features

Materials Features

Dimensional Stability,

High Strength,

Light Weight

Features & Benefits

Features

• Light weight and excellent machinability
• Excellent dimensional stability, heat resistance and strength
• Applicable to mock-ups, negative molds etc.

Features and Major Physical Properties SANMODUR LC - M

• *1 - The board was cut using an NC machine. The Surface roughness of the cut section was measured through the use of non-contact three-dimensional surface roughness tester. The surface roughness is the average absolute value of irregularities; and the lower the value, the smoother the surface is.
• *2 - The milling resistance during cutting through the use of an NC machine driven with 4-component dynamometer under the following conditions was measured: Edge: throw-away tip of carbide tool with a diameter of 10mm (0.4in), Revolution rate; 10,000 rpm, Feed speed: 2,000 mm/min (6.56 ft/min), Cut depth: 3mm (0.12in).
• *3 - The board was cut continuously for 10m (32.8ft) using an NC machine under the following conditions; Edge: normal cutting edge of high-speed steel with a diameter of 10 mm (0.4in), Revolution rate: 10,000 rpm, Feed speed: 100mm/min (0.33 ft/min), pitch: 1mm (0.04in), Cut depth: 3mm (0.12in) The degree of abrasion of the cutter edge after cutting was visually evaluated with a stereomicroscope"

Functions

Composite Materials Functions

Core Material

Function

Core Material

Packaging & Availability

Size and Packing

The following table shows the size and number of boards per case. 

Product Name	Size Approx.[in]	Size [mm]	Number of Boards per Case
SANMODUR LC-10M	59×20×4	1500×500×100	1

 

Properties

Physical Form

Solid