IAM Cationic Surfactant
1 of 15 products in this brandIAM Cationic Surfactant is a emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.
Functions: Emulsifier, Surfactant, Surfactant (Cationic)
Chemical Family: Alkanolamines, Cationics, Fatty Amines
End Uses: Asphalt, Cold Mix, Tack Coat
Applicable Processes: Chipseal
Features: High Viscosity
Physical Form: Paste
Enhanced TDS
Identification
- Chemical Family
- Categories
Applications
- Applicable Processes
Applications & Uses
- Dosage
-
Cationic rapid set emulsion 0.15-0.30% pH 1.5-3 hydrochloric acid
Cationic medium set emulsion 0.30-0.45% pH 1.5-3 hydrochloric acid
End Uses
- Industrial Additives End Use
Features
- Industrial Additives Features
Features & Benefits
- Features
-
- High emulsion viscosity: Emulsions prepared using IAM Cationic Surfactant have significantly higher viscosities, which allow specifications to be met at the minimum bitumen content
- Low use level: 0.15-0.30% is normally sufficient for rapid-set emulsions
Functions
- Industrial Additives Functions
- Function
-
Surfactant, Emulsifier, Surfactant (Cationic)
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
-
IAM Cationic Surfactant is available in bulk shipment, or in tight head steel drums of 360 lbs (163 kg) net weight.
Properties
- Physical Form
Storage & Handling
- Storage Conditions
-
- IAM Cationic Surfactant may be stored in carbon steel tanks. Bulk storage should be maintained at 50-60°C (122-140°F). Avoid extended heating above 65°C (150°F).
- IAM Cationic Surfactant contains amines and may cause severe irritation or burns to skin and eyes. Protective goggles and gloves must be worn when handling this product.